Model Number: EES-100-xx
DC Electronic Load Control Software  Test Batteries & More Real Time DATA Collection 0 - 50 / 150 Vdc  &  0 - 20 / 40 / 80+ Amps
Use With:	1 or 2  Electronic Loads
Drives:	I2C ( Hardware EE301-I2C )
Drives:	I2C ( Hardware EE301-I2C-CABLE )
Drives:	PARALLEL PORT OF PC OR CARD
Don't waste hours writing your own software and not have it work!
Use this software with the following manufactures
Executive Engineering				Nation Instruments INTERFACE

Check back often for NEW Versions & updates

 CONSTANT POWER TESTING

Battery Charging / Discharging

LOG DATA ON YOUR PC

   Works in demo mode without a key,  Down Load & TRY IT 

• Specifications

  • software: File: Save / recall test setup for Software Setting

  • software: settable Parallel port: I/O ( works with internal parallel cards also )

  • software: File: settable data ranges 

  • software: hardware: gain control loops 

  • software: hardware: settable voltage / current scaleable (gain)  

  • software: hardware: automatic channel calibration

  • software: Mode: constant current   

  • software: Mode: constant resistance  

  • software: Mode: constant power  

  • software: Mode: constant voltage 

  • software: Mode: short circuit ( Measures Internal series resistance) 

  • software: Mode: current bias offset ( down timing & minimal CC, CV, CR, CP )  

  • software: Timing: UP time  ( 0 - sec / hrs) 

  • software: Timing: Down Time  ( 0 -  sec / hrs) 

  • software: Timing: Data Collection Rate  Data Collection Rate  ( 1 - sec / hrs) 

  • software: Timing: Down & up time for current bias offset  ( 0 -  sec / hrs) 

  • software: auto-off: Min & Max Voltage / settable

  • software: auto-off: Min & Max Current / settable

  • software: Data Collection: Multi Channel &  Multi Mode

  • software: Data Collection: CVS, Space,  ( ASCII Text format)

  • software: Data Collection: Current /  Voltage / Resistance / Power + more

  • software: Data Collection: Up Time, Down Time, Total Time, Elapsed Time

  • software: Data Collection: on / off

  • software: Data Collection: for  electronic loads

  • software: Data Collection: variable data smoothing times 

  • software: Data Collection: variable control loop gain:

  • software: Data Collection: Direct insertion into excel spread sheet

  • software: Data graphing:  volts / power / resistance / amps / hours

  • software: Data output display: display data list & Printable windows Format

  • software: offset:  voltage corrections of hardware

  • software: control: 0 - 20.000 / 40.000 / 80.000 Amps DC ( each channel ) 

  • software: control: 0.000 - 50.000 / 150.000 Volts DC  ( each channel )

  • software: control: Standard: two ( 2 ) CHANNELS

  • Communications: Parallel port Bus I/O: settable data bus speeds I2C

  • Communications: Parallel port Bus I/O speed: < 0.2 ms per command

  • HARDWARE: Requires USB hardware key (supplied with software)

FREE.. DEMO SOFTWARE   >    >   >  >  > > ( EES-100-02 full working system Version 1.10 ) (Help File Only LCHELP) Version 1.10

What you need for a software system ELECTRONIC LOAD + EE301-I2C hardware for load control + EE301-I2C-CABLE this is a power and interface cable.